Shrinkage cracks in cement-stabilized bases/subbase can be alleviated by specifying the right cement dosage, or by other additives/procedures that suppress crack susceptibility. A field trial of six 1000 ft sections to investigate several alternative techniques was initiated and constructed in August 2000. The following additives/procedures are included for investigation: 5.5% cement additive (control); design based on a reduced strength criteria, 5.5% cement precracked while "young", 5.5% cement precut (grooved) every 3m (10 ft), 3.5% cement with 8% fly ash, Ground granulated blast furnace slag (GGBFS) complemented by 2% lime, Three percent lime and 12% fly ash, the current favored stabilization technique of MDOT.
A five-year study was initiated seeking materials/additives and procedures that help to mitigatecrack susceptibility in cement-treated material (CTM)....
Shrinkage cracks in cement-stabilized bases/subbase can be alleviated by specifying the right cement dosage, or by other additives/procedures that sup...
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.