United States Department of Transportation
About
i
Rapid replacement of Tangier Island bridges including lightweight and durable fiber-reinforced polymer deck systems.
-
2009-01-01
[PDF-3.03 MB]
Details:
-
Creators:
-
Corporate Creators:
-
Subject/TRT Terms:
-
Publication/ Report Number:
-
Resource Type:
-
Geographical Coverage:
-
Edition:Final contract report.
-
Corporate Publisher:
-
Abstract:Fiber-reinforced polymer (FRP) composite cellular deck systems were used as new bridge decks on two replacement bridges on Tangier Island, Virginia. The most important characteristics of this application were reduced self-weight and increased durability for an FRP deck system over a reinforced concrete bridge deck. Tangier Island is in the Chesapeake Bay and is accessible only by water or air; each bridge is over saltwater. The two bridge deck systems used were from different manufacturers: Strongwell Corp. and Zellcomp, Inc. The deck system from Strongwell was virtually identical to a previous application by the Virginia Department of Transportation (VDOT) in Covington, Virginia. Because of the extensive testing of this system conducted as part of a prior Innovative Bridge Research and Deployment project, further investigation of its behavior was not warranted. The objectives of the testing of the Zellcomp deck system were four-fold: (1) investigate connection behavior under simulated pseudo-static service load; (2) examine flexural strength and failure mode of connections and deck; (3) explore fatigue behavior during simulated cyclic wheel loading and residual strength after fatigue loading; and (4) investigate viability of transition connection. Two test sections were constructed in the Structures and Materials Laboratory at Virginia Tech. The test sections included sections of the Zellcomp deck attached to supporting steel stringers. The first was flat, 11 ft by 8 ft in plan, and subjected to static and simulated truck loadings. The second included a transition connection and was 17 ft by 8 ft in plan. Of special interest during this testing was the investigation of the static and cyclic behavior of all Zellcomp deck connections (top plate to supporting T-sections, T-section to T-section, and T-section to supporting stringers). The flat Zellcomp deck test specimen had a 1.4 safety factor against sustaining permanent damage and a 2.4 safety factor against failure when subjected to an HL-93 wheel load of 22 kips. There was no measured composite action between the top plate and supporting T-section. Generally, the specimen performed well during the fatigue test. However, there was some indication of deterioration of the lap joint connections at 1 million cycles of load and loss of stiffness at about 2.5 million cycles of load. The bent lap joint connection was difficult to construct. A permanent gap between the top plate and supporting T-sections resulted because of inherent construction tolerances. The slope Zellcomp deck specimen underwent significant deterioration during the first 600,000 cycles of load. Numerous top plate screw connections loosened, with several completely fracturing. The damage to the deck increased for the next 400,000 cycles. The study recommended that VDOT's Structure and Bridge Division (1) not use the sloped deck transition on any applications of the Zellcomp bridge deck system; (2) consider close inspection of all screw connections on the Zellcomp deck during regularly scheduled bridge inspections; and (3) consider additional more rigorous full-scale testing of the Zellcomp deck system before considering its use on any bridge structure that has truck traffic. The Tangier Island Bridge is subjected to very light truck traffic, and the Zellcomp system proved to be adequate for this specific application only.
-
Format:
-
Collection(s):
-
Main Document Checksum:
-
File Type:
Supporting Files
-
No Additional Files
More +
You May Also Like
[PDF - 1.67 MB]
