Field test of a new procedure for removing lead-based paint from bridges.
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.

Search our Collections & Repository

For very narrow results

When looking for a specific result

Best used for discovery & interchangable words

Recommended to be used in conjunction with other fields

Dates

to

Document Data
Library
People
Clear All
Clear All

For additional assistance using the Custom Query please check out our Help Page

i

Field test of a new procedure for removing lead-based paint from bridges.

Filetype[PDF-303.76 KB]


English
Details You May Also Like

Details:

  • Creators:
  • Corporate Creators:
  • Subject/TRT Terms:
  • Publication/ Report Number:
    FHWA/VTRC 00-R19
  • Resource Type:
    Tech Report
  • Geographical Coverage:
    Virginia
  • Edition:
    Final report.May 1998.
  • Corporate Publisher:
    Virginia Transportation Research Council (VTRC)
  • Abstract:
    According to the National Bridge Inventory, of the more than 200,000 steel bridges listed, between 80 and 90 percent were painted with lead-based paint. Of the approximately 7,000 bridges in Virginia with steel superstructures, well over half were painted with systems that contain lead-based formulations. Removing the failed and failing lead-containing paint from highway bridges without jeopardizing environmental quality and worker health has become an increasingly vexing problem. The expense and liability involved in disposing of the debris add to the problem. The cost of maintaining such structures is an increasing burden because of the requirements for dealing with lead in the environment and workplace, especially when traditional methods are used. In the Virginia Department of Transportation alone, there has been an 86 percent reduction in the number of structures painted between 1990 and 1996 because of the cost and uncertainty in dealing with lead. This report documents a field trial of a unique procedure named ElectroStrip® (ElectroStrip) that uses an electrochemical treatment to cause paint to debond from structural steel. Proven in the laboratory, this is the first use of this technology at a production level. As part of a bridge painting contract, ElectroStrip was used to remove 74 m² of lead-based paint from the beam of a bridge in service on the Virginia interstate system. Over the course of 7 workdays, the ElectroStrip method removed the original paint system and generated 63 percent less solid debris than full abrasives blasting would have done. The results of this trial showed that ElectroStrip, though not a panacea, is a viable tool for paint management systems, particularly for environmentally sensitive situations. Although the production rate using ElectroStrip is slower than those of more conventional techniques, ElectroStrip provides greater environmental and worker protection than any other paint removal method demonstrated and documented thus far.
  • Format:
    PDF
  • Collection(s):
  • Main Document Checksum:
  • Download URL:
  • File Type:

Supporting Files

  • No Additional Files
More +

You May Also Like

Checkout today's featured content at rosap.ntl.bts.gov