A correlation between the results obtained with the fatigue test and those from the indirect tensile test on two base mixes was attempted in anticipation of the possible use of the latter test to design base mixes for maximum fatigue life. Two base mixes at several asphalt contents were tested at two test temperatures. Flexural fatigue tests and indirect tensile tests were performed for each mix and temperature condition. Unexpectedly, there was a very poor correlation between the constants of the fatigue equations and the strength and stiffness values from the indirect tensile tests. However, the asphalt content corresponding to the maximum fatigue life agreed generally with the asphalt content corresponding to maximum work in the indirect tensile test. The work computed from the indirect tensile test might be useful in selecting the asphalt content for the maximum fatigue life of base mixes.
This report (1) identified and characterized Virginia's nonpolishing aggregates in terms of their wet skid resistance, (2) compared the standard ASTM ...
It is obvious that many variables may influence the quality of a surface treatment, but the relative importance of the many variables involved is a ma...
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.