Funahashi, M., & Young, W. (1998). Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete (Report No. FHWA-RD-98-058). Turner-Fairbank Highway Research Center. https://rosap.ntl.bts.gov/view/dot/13628
Funahashi, M. and W.T. Young. Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete. Report no. FHWA-RD-98-058. Turner-Fairbank Highway Research Center, 1998. https://rosap.ntl.bts.gov/view/dot/13628.
Funahashi, M., and W.T. Young Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete. Turner-Fairbank Highway Research Center, 1998, Report no. FHWA-RD-98-058, ROSA P. https://rosap.ntl.bts.gov/view/dot/13628.
This is the final report for a study to evaluate the use of sacrificial cathodic protection for reinforced and prestressed concrete bridge members. Cathodic protection (CP) using impressed current is an accepted and common method used to provide corrosion protection to steel in concrete. Sacrificial cathodic protection, however, is relatively easy to apply, does not require that the anode be electrically isolated from the steel, and does not require an external power supply. In the past, attempts to apply sacrificial anode CP to bridge structures have met with limited success because conventional sacrificial anode alloys operate at a low fixed potential and the conductivity of concrete often does not permit satisfactory current output. The Florida Department of Transportation (DOT) has applied arc-sprayed zinc to several bridges in the marine environment. This study examined the performance of existing sacrificial alloys in different environments for sacrificial CP, and developed new sacrificial alloys for protecting steel in concrete. The study consisted of both laboratory and field tasks. (65 p.)
Funahashi, M., & Young, W. (1998). Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete (Report No. FHWA-RD-98-058). Turner-Fairbank Highway Research Center. https://rosap.ntl.bts.gov/view/dot/13628
Funahashi, M. and W.T. Young. Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete. Report no. FHWA-RD-98-058. Turner-Fairbank Highway Research Center, 1998. https://rosap.ntl.bts.gov/view/dot/13628.
Funahashi, M., and W.T. Young Field evaluation of a new aluminum alloy as a sacrificial anode for steel embedded in concrete. Turner-Fairbank Highway Research Center, 1998, Report no. FHWA-RD-98-058, ROSA P. https://rosap.ntl.bts.gov/view/dot/13628.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.