Davidson, B. (1998). Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results (Report No. DOT/FAA/AR-97/87). William J. Hughes Technical Center (U.S.). https://doi.org/10.21949/1404582
Davidson, Barry. Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results. Report no. DOT/FAA/AR-97/87. William J. Hughes Technical Center (U.S.), 1998. https://doi.org/10.21949/1404582.
Davidson, Barry Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results. William J. Hughes Technical Center (U.S.), 1998, Report no. DOT/FAA/AR-97/87, ROSA P. https://doi.org/10.21949/1404582.
A methodology is presented for the prediction of delamination growth in laminated structures. The methodology is aimed at overcoming computational difficulties in the determination of energy release rate and mode mix. It also addresses the issue that many laminated composites exhibit large-scale crack tip damage zones and, as such, a singular field-based mode mix decomposition may not accurately account for the dependence of toughness on the loading. In the methodology, the toughness versus mode mix relation, and the definition of mode mix itself, is first determined experimentally. The definition of mode mix is found from the results of a series of delamination toughness tests and is obtained within the construct of a crack tip element analysis. Next, the structure of interest is analyzed using the crack tip element analysis and the experimentally determined definition of mode mix, and delamination growth assessments are performed. This approach also obviates the need for locally detailed two- and three-dimensional finite element analyses.
Davidson, B. (1998). Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results (Report No. DOT/FAA/AR-97/87). William J. Hughes Technical Center (U.S.). https://doi.org/10.21949/1404582
Davidson, Barry. Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results. Report no. DOT/FAA/AR-97/87. William J. Hughes Technical Center (U.S.), 1998. https://doi.org/10.21949/1404582.
Davidson, Barry Predictive Methodology for Delamination Growth in Laminated Composites Part 1: Theoretical Development and Preliminary Experimental Results. William J. Hughes Technical Center (U.S.), 1998, Report no. DOT/FAA/AR-97/87, ROSA P. https://doi.org/10.21949/1404582.
ROSA P serves as an archival repository of USDOT-published products including scientific
findings, journal articles, guidelines, recommendations, or other information authored or co-authored by
USDOT or funded partners. As a repository, ROSA P retains documents in their original published format to
ensure public access to scientific information.
Links with this icon indicate that you are leaving a Bureau of Transportation
Statistics (BTS)/National Transportation Library (NTL)
Web-based service.
Thank you for visiting.
You are about to access a non-government link outside of
the U.S. Department of Transportation's National
Transportation Library.
Please note: While links to Web sites outside of DOT are
offered for your convenience, when you exit DOT Web sites,
Federal privacy policy and Section 508 of the Rehabilitation
Act (accessibility requirements) no longer apply. In
addition, DOT does not attest to the accuracy, relevance,
timeliness or completeness of information provided by linked
sites. Linking to a Web site does not constitute an
endorsement by DOT of the sponsors of the site or the
products presented on the site. For more information, please
view DOT's Web site linking policy.
To get back to the page you were previously viewing, click
your Cancel button.