- Mid-America Transportation Center 1
- Missouri University of Science and Technology. Department of Civil, Architectural, and Environmental Engineering 1
- Missouri University of Science and Technology. Department of Civil, Architectural and Environmental Engineering 4
- Texas A&M University 2
- University of Nebraska. Mid-America Transportation Center 2
- Barriers (Roads) 1
- Bars (Building materials) 1
- Bridge design 2
- Bridge members 1
- Bridge railings 1
- Bridges 1
- Columns 1
- Composite structures 1
- Concrete 1
- Concrete bridges 2
- Earthquake resistant design 1
- Fiber reinforced concrete 2
- Fiber reinforced polymers 2
- Finite element method 1
- GFRP reinforced concrete barrier 1
- Glass fiber reinforced concrete 2
- Glass fiber reinforced plastics 1
- Impact loads 1
- Impact studies 1
- Impact tests 2
- Numerical analysis 2
- Optimization 2
- Printers 1
- Reinforced concrete bridges 1
- reinforcement design 1
- Static loads 2
- Three dimensional displays 1
- Validation 2
- Walls 1
(Max 200)
- Mid-America Transportation Center (1)
- Missouri University of Science and Technology. Department of Civil, Architectural, and Environmental Engineering (1)
- Missouri University of Science and Technology. Department of Civil, Architectural and Environmental Engineering (4)
- Texas A&M University (2)
- University of Nebraska. Mid-America Transportation Center (2)
- Barriers (Roads) (1)
- Bars (Building materials) (1)
- Bridge design (2)
- Bridge members (1)
- Bridge railings (1)
- Bridges (1)
- Columns (1)
- Composite structures (1)
- Concrete (1)
- Concrete bridges (2)
- Earthquake resistant design (1)
- Fiber reinforced concrete (2)
- Fiber reinforced polymers (2)
- Finite element method (1)
- GFRP reinforced concrete barrier (1)
- Glass fiber reinforced concrete (2)
- Glass fiber reinforced plastics (1)
- Impact loads (1)
- Impact studies (1)
- Impact tests (2)
- Numerical analysis (2)
- Optimization (2)
- Printers (1)
- Reinforced concrete bridges (1)
- reinforcement design (1)
- Static loads (2)
- Three dimensional displays (1)
- Validation (2)
- Walls (1)
- :Wei, Congjie ;Myers, John2022-08-01:The reported work enclosed the numerical modeling of GFRP reinforced concrete bridge barrier under static and impact load. The GFRP configurations wer...
- :Wei, Congjie ;Gadhe, Manish Kumar2025-07-01:The reported work includes the experiment testing of glass fiber reinforced polymer (GFRP) and steel reinforced concrete bridge barriers. A total of f...
- :Wu, Chenglin ;Myers, John J.2024-09-01:The main goal of this research is to design a barrier with GFRP materials and compare it with steel. The MoDOT Type D concrete barrier with steel bar ...
- :Wu, Chenglin ;ElGawady, Mohammad2024-01-01:This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design a...
- :Wu, Chenglin ;Myers, John2024-01-01:The main objective of this research is to design a concrete barrier that is reinforced with glass fiber reinforced polymer (GFRP) materials. The desig...
Exit Notification/Disclaimer Policy
Thank you for visiting.
You are about to access a non-government link outside of the U.S. Department of Transportation's National Transportation Library.
Please note: While links to Web sites outside of DOT are offered for your convenience, when you exit DOT Web sites, Federal privacy policy and Section 508 of the Rehabilitation Act (accessibility requirements) no longer apply. In addition, DOT does not attest to the accuracy, relevance, timeliness or completeness of information provided by linked sites. Linking to a Web site does not constitute an endorsement by DOT of the sponsors of the site or the products presented on the site. For more information, please view DOT's Web site linking policy.
To get back to the page you were previously viewing, click your Cancel button.