- 2018 2
- Axial loads 1
- Bearing piles 1
- Coefficient of internal friction 1
- Composite construction 1
- Compressive strength 1
- Cores (Specimens) 1
- Databases 1
- Design 1
- Drilled shafts 1
- Engineering geology 1
- Foundations 1
- Friction angle 1
- Geotechnology 1
- Hard rock 1
- Highways 1
- Piles (Supports) 1
- Reinforced concrete 1
- Reinforcing steel 1
- Rocks 1
- Spread footings 1
- Steel pipe 1
- Testing 1
- Triaxial compression 1
- Uniaxial compression 1
- Young's modulus 1
(Max 200)
- Axial loads (1)
- Bearing piles (1)
- Coefficient of internal friction (1)
- Composite construction (1)
- Compressive strength (1)
- Cores (Specimens) (1)
- Databases (1)
- Design (1)
- Drilled shafts (1)
- Engineering geology (1)
- Foundations (1)
- Friction angle (1)
- Geotechnology (1)
- Hard rock (1)
- Highways (1)
- Piles (Supports) (1)
- Reinforced concrete (1)
- Reinforcing steel (1)
- Rocks (1)
- Spread footings (1)
- Steel pipe (1)
- Testing (1)
- Triaxial compression (1)
- Uniaxial compression (1)
- Young's modulus (1)
- :Folta, Brian ;Sharpe, Jacob2018-06-01:Rock strength and elastic behavior are important for foundations such as spread footings resting on rock and drilled shafts socketed into rock. In add...
- :Hu, Chen ;Sharpe, Jacob2018-06-01:A steel pipe-pile section, filled with concrete, was instrumented and tested under axial load. Two types of strain gages, resistive and vibrating wire...
Exit Notification/Disclaimer Policy
Thank you for visiting.
You are about to access a non-government link outside of the U.S. Department of Transportation's National Transportation Library.
Please note: While links to Web sites outside of DOT are offered for your convenience, when you exit DOT Web sites, Federal privacy policy and Section 508 of the Rehabilitation Act (accessibility requirements) no longer apply. In addition, DOT does not attest to the accuracy, relevance, timeliness or completeness of information provided by linked sites. Linking to a Web site does not constitute an endorsement by DOT of the sponsors of the site or the products presented on the site. For more information, please view DOT's Web site linking policy.
To get back to the page you were previously viewing, click your Cancel button.