Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.

Search our Collections & Repository

All these words:

For very narrow results

This exact word or phrase:

When looking for a specific result

Any of these words:

Best used for discovery & interchangable words

None of these words:

Recommended to be used in conjunction with other fields

Language:

Dates

Publication Date Range:

to

Document Data

Title:

Document Type:

Library

Collection:

Series:

People

Author:

Help
Clear All

Query Builder

Query box

Help
Clear All

For additional assistance using the Custom Query please check out our Help Page

i

Development and evaluation of best management practices (BMPS) for highway runoff pollution control.

Filetype[PDF-11.66 MB]


Select the Download button to view the document
This document is over 5mb in size and cannot be previewed
  • English

  • Details:

    • Publication/ Report Number:
    • Resource Type:
    • Geographical Coverage:
    • Corporate Publisher:
    • Abstract:
      Polluted storm water runoff is commonly transported through Municipal Separate Storm Sewer Systems (MS4s). Currently,

      sufficient information is not available on development and evaluation of Best Management Practices (BMPs) within an MS4

      boundary for highway storm water runoff treatment and management. The objectives of this research were to: a) develop and test

      the feasibility of roadside BMPs that rely on bioretention, infiltration, and slow conveyance of storm water; b) test combinations

      of plants and soil media that will be sustainable in Nebraska; and c) test the feasibility of using rubber chips as an alternative BMP

      medium. This project was conducted in two phases. In Phase I (07/2011−12/2012), four field-scale BMPs were designed,

      constructed and monitored, and four types of rubber chip mediated soil mixtures were tested in bench-scale columns for physical

      properties related to plant growth and infiltration as well as storm water treatment effectiveness. In Phase II (01/2013−12/2013),

      the four field-scale BMPs were monitored. In Phase I, it was found that a 50/50 mixture of rubber chips and sand had the best

      treatment, but lacked the best qualities for plant growth and may require addition of compost. The benefit of adding rubber chips

      as a low cost alternative material for filler did not outweigh the leaching of lead, copper and zinc. In Phase II, field tests indicate

      that the bioretention cells with the 30% loam 50% sand 20% mulch mix and with the 50% compost 50% sand mix had good

      vegetative growth and good physical characteristics to support vegetative growth and establishment. The infiltration trench had

      minimal sediment interception and clogging but showed slow drawdown times in the spring months. The filter trench had variable

      TSS removal percentages, with the side slope of the filter trench contributing a large amount of the solids loading. The check dam

      filters experienced significant sediment accumulation after the first storm event. However, it was found that drawdown times were

      still within the range for operation. The four BMPs tested are all functional and feasible for treatment of highway storm water

      runoff, with bioretention cells being the cheapest to construct ($0.91* ft3 of water quality volume of the watershed). Results

      obtained from this two-phase project can be used to design and build field-scale BMPs in eastern Nebraska (e.g., areas near

      Omaha and Lincoln).

    • Format:
    • Main Document Checksum:
    • File Type:

    Supporting Files

    • No Additional Files

    More +

    You May Also Like

    Checkout today's featured content at rosap.ntl.bts.gov

    Version 3.26