Welcome to ROSA P |
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
Clear All Simple Search
Advanced Search
Rapid orthophoto development system.
  • Published Date:
  • Language:
Filetype[PDF-4.80 MB]

  • Publication/ Report Number:
  • Resource Type:
  • Geographical Coverage:
  • Abstract:
    The DMC system procured in the project represented state-of-the-art, large-format digital aerial camera systems at the start of project. DMC is based on the frame camera model, and to achieve large ground coverage with high spatial resolution, the output image is formed from four independent images acquired by four cameras. DMC procured for OCMS was carefully tested to assess its performance level. From test flights by ODOT, three different blocks were selected, representing different flying condition and flight geometry. Five methods were used for the performance evaluation, including two methods where self-calibration was also introduced. The analysis of the results confirmed that the DMC meets the manufacturer’s specification. To maintain consistent performance in normal operations, periodical calibration flights and the use of ground controls as check points is highly recommended. In addition to further support QA/QC, the use of automated aerial triangulation is also suggested. The main product of the ODOT Office of Mapping and CADD Services is orthophoto, which is widely used in many applications at ODOT and other State offices. Since ODOT primarily acquires data over the transportation network, the orthophoto production has some specific needs, such as dealing with bridges and occlusions, besides the general tasks of the orthoimage workflow. In this project, an innovative method was developed to support the orthoimage generation at bridges. The concept is built around the development of a precise bridge model, which is formed from the DMC imagery and LiDAR data. In addition, a true orthophoto generation process was implemented. The initial versions of both software tools installed at Office of CADD and Mapping Services for testing provided valuable feedback for algorithmic refinements.
  • Format:
  • Funding:
  • Main Document Checksum:
  • Supporting Files:
    No Additional Files
No Related Documents.
You May Also Like: