Welcome to ROSA P |
Stacks Logo
Advanced Search
Select up to three search categories and corresponding keywords using the fields to the right. Refer to the Help section for more detailed instructions.
 
 
Help
Clear All Simple Search
Advanced Search
Chemically stabilized soils.
  • Published Date:
    2009-12-01
  • Language:
    English
Filetype[PDF-24.97 MB]


This document cannot be previewed automatically as it exceeds 5 MB
Please click the thumbnail image to view the document.
Chemically stabilized soils.
Details:
  • Supporting Files:
    No Additional Files
No Related Documents.
You May Also Like:
  1. Broken Rim Detection Using Proximity Sensors
    Published Date:
    2020-11-01
    Abstract:
    From February to April 2014, Transportation Technology Center, Inc. (TTCI) performed research and testing on a broken rim detector concept by Diesel Intellect International (DII). The detector uses proximity sensors to detect the presence of rim mate...
    File Type:
    Filetype[PDF - 2.19 MB]
  2. Ultraweldable and Low Temperature Steels for Truck Castings [Research Results]
    Published Date:
    2020-11-01
    Abstract:
    From September 2016 to December 2017, the Federal Railroad Administration’s (FRA) Office of Research, Development and Technology funded a research investigation by, conducted by Transportation Technology Center, Inc. (TTCI) to study two types of im...
    File Type:
    Filetype[PDF - 478.87 KB]
  3. Long-Term Pavement Performance Data Analysis Program: Effect of Dowel Misalignment on Concrete Pavement Performance
    Published Date:
    2020-11-01
    Abstract:
    Magnetic imaging tomography (MIT) scanning is a nondestructive method for measuring the alignment of dowels placed at transverse joints of jointed plain concrete pavements (JPCPs). Several highway agencies across the United States have adopted specif...
    File Type:
    Filetype[PDF - 7.18 MB]
  4. Compliance Testing for Locomotive LED Headlights and Auxiliary Lights, Phase I
    Published Date:
    2020-10-01
    Abstract:
    This report describes Phase I compliance testing of light-emitting diode (LED) fixtures as locomotive headlights and auxiliary lights. The purpose was to validate that all LED samples submitted by participating suppliers complied with applicable regu...
    File Type:
    Filetype[PDF - 38.09 MB]
  5. Compliance Testing for Locomotive LED Headlights and Auxiliary Lights, Phase II
    Published Date:
    2020-10-01
    Abstract:
    With the development of new lighting technologies, such as light-emitting diodes (LED), the safety requirements stipulated in 49 CFR §229.125 may not adequately accommodate the introduction of LED lamps to the railroad industry. Consequently, it is ...
    File Type:
    Filetype[PDF - 8.03 MB]